DCC Concepts Cobalt Omega and AD1 HP Bundle 12 Pack.
This is a offer for a 12 pack AD1 HP and Cobalt Omega. While stocks last.
Info Cobalt Omega.
Overview of Cobalt Classic:
Cobalt Classic Ω is very powerful but gentle on your turnouts, available singly and in packs of six or twelve.
A moveable fulcrum allows easy adjustment of blade closure pressure and ensures that throw can be easily adjusted irrespective of scale, type of point-work or thickness of baseboards.
Cobalt Classic Ω has THREE on-board SPDT switches – one linked to the two power input wires is “diode controlled” and is perfect for panel lights or switching of signals, low current relay control or feedback/computer IO. The other two are tough 5 amp SPDT switches that you can use for frog power or any other form of switching/interlocking around the layout.
Cobalt Classic Ω is compatible with all common modelling gauges from Z to G scale, and can be used with 2 or 3 rail systems from any brand, whether the layout is AC, DC or DCC powered. Cobalt Classic Ω is easily and economically converted for DCC use with the addition of purpose designed AD-Series accessory decoders.
(If you are using DCC and already have solenoid accessory decoders, that’s okay too – You can power Cobalt Classic Omega Ω with accessory decoders designed for three wire solenoids if you also use our DCCconcepts SDC adapters.)
Cobalt Classic Ω draws very little current and is designed to be powered by any regulated DC power supply. We recommend 9v DC regulated…but because it includes a simple-to-use voltage range change switch, you can use any DC power supply between 7 and 18v.
With its low current draw (Varies with voltage but typically 20mA) big power supplies are not needed, so you can choose to use any appropriate sized “wall plug” type regulated DC power supply for a smaller layout.
For larger layouts, we strongly recommend our excellent PSU-2 power supply, which, because of its unique 9v+9v “split-rail” configuration, both supplies the perfect voltage and even further simplifies wiring!
We also offer a complete range of Cobalt accessories for Cobalt Classic Ω – switch packs with panel mount LEDS, foam mounting pads for even quieter operation, tie-bar stickers to disguise the mounting holes and accessory packs that even include the drills needed for installation.
Most importantly, all Cobalt Classic Ω point motors also are guaranteed for life, so as long as you own any Cobalt point motor, it is under warranty and in the rare event of a fault, we will, as needed, replace it or repair any problem that may arise… so you can be confident that when buying ANY Cobalt motor, it will indeed be the last point motors you ever need to buy!
Info AD1HP Accessory Decoder.
12 x Cobalt iP DCC Decoder Stall Motor Drive Type (1 Output/High Power)
Cobalt iP DCC Decoder Stall Motor Drive Type (1 Output/High Power)
AD1HP is a Single output high power DCC accessory decoder for Cobalt type motors. It is also a DCC-addressable relay! Why not combine AD1HP with DCD-REX and switch multiple devices with a single digital command? The possibilities are virtually endless!
On DC or DCC, AD1HP is easily capable of powering several Cobalt Classic… and also works well with “other brand” higher current devices. (Interfaced properly, it even makes Lemaco and Fulgurex point motors a little less angry sounding).
The AD1HP has zero current draw when not changing so many of them can connect straight to track power and not load the bus. The ability to change several points at once and also operate with DCC or push-button switches as required keeps wiring really simple for complex crossovers and large fiddle yards too.
Really simple set up and addressing.
Designed to fit neatly into the side of Cobalt Omega or iP Analog and give you the option of digital or push-button control.
AD1HP also works really well on DC power to make DC control and wiring the simplest it has ever been.