Recently Viewed

ECoS 2 50200

Our Price:  £570.00(Inc. 20% VAT)Earn 570 Loyalty Points
+

Model:  50200
Part Number:  50200
Manufacturer:  ESU

Availability:  

  

1 in stock, immediate despatch

ESU


Technical data ECoS 50200

Hardware: H4 booster with 4.0 A continuous-load output
  RailCom® bidirectional feedback detector with integrated cutout device ("global detector")
  H4 programming track connection, 0.6 A rated
  7 inch TFT colour display with touchscreen, 800x480 (pixels) display resolution
  32-Bit ARM 720T controller, 64 MByte flash ROM, 32 MByte RAM, Linux® operation system
  16 Bit real-time co-processor
  2 motor-driven potentiometer throttles with end stop
  two 2-way analog joysticks; two 9-function keys plus stop- and go-key
  3 input sockets for ECoSlink systems
  Connection for ECoSlink bus expansion
  Galvanically isolated booster input for external DCC or Märklin® 6017 boosters
  Galvanically isolated ECoSniffer input for connection of old units
  Galvanically isolated s88-bus input for feedback devices; 10/100 Mbit ethernet connection (RJ45)
  1 ECoSlot module for radio-receiver input
Software: DCC with 14, 28, 128 speed steps, LGB® compatible function key handling
  RailCoM®
  Märklin® Motorola® old, new, with 14 or 27 speed steps (2 modes, depends on availability of decoder)
  Selectrix® track format
  M4 data protocol with automatic recognition
  Up to 9999 addresses for DCC protocol. Up to 20 function keys per loco
  Up to 255 addresses for Motorola® protocol (depends on availability of decoder)
  Märklin® Motorola® and DCC track protocol for control of electromagnetic accessories
  Up to16384 locos, 2048 turnouts and 1024 route objectives; 32 MU´s (multiple consists) with up tp 16 locos each
  Up tp 16 shuttle trains (back´n forth) at the same time
  All DCC service modes programming on programming track, POM (programming on the main)
  Programming of Motorola® and Selectrix® on programming track.
Included in delivery: ECoS central unit
  Stylus for touch screen
  Power supply output voltage adjustable from 15V to 21V / 5A (90VA)
  Terminals for mail track and programming track connection, ECoSniffer
  Extensive instruction manual
Dimensions: 37.0 cm x 16.0 cm x max. 9.0 cm
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
The Best Yet !
Tuesday, 17 November 2015  | 

I would rarely do a review on many items, however, after a considerable amount of research on this control system ( its much more than that ) I decided to take the plunge and make a purchase. Having used and owned several DCC control systems over the years this has to be the best I have owned and used.
Like many expensive items it is always wise to do your research and ask if in any doubt prior to making the plunge (this was a late birthday present to myself ).
Any fears that I may have had were unfounded from my point of view as I have very quickly become accustomed to this DCC system on steroids !
There are very few systems which compare to the way in which this unit can provide so many useable features, and more, all in one place. I have found the touch screen feature a real bonus and a pleasure to use with further possibilities to produce a layout diagram for RailCom monitoring of your locomotives at any point on your layout. It will recognise numerous DCC manufacturers products when used in conjunction with it and also has something known as "Ecosniffer" which accepts certain other DCC systems to be plugged into it and be used in conjunction with the Ecos command station acting as the primary control (which means your current system may not be totally redundant).
At the risk of sounding too enthusiastic I would wholly recommend this Command System if it is within someones budget, if not maybe save up for one because I for one don't have any regrets whatsoever in purchasing it.
There are so many possibilities in its use for the DCC enthusiast many of which I have yet to discover and look forward to doing so.
Whilst there are not too many English reviews or videos I have found that YouTube has been of use prior to purchasing and one in particular under the user name of "Hovermotion" (no connection and usual disclaimer applies ) who gives quite a few fairly extensive tutorials as a first time user.
Final I would also like to that DCC Train Automation for all the help prior to purchasing the product and the aftersales help when needed.

Was this helpful to you?  Yes  /  No

20 of 20 people found this review helpful.


Customers who bought this item also bought:


Related Products
NEW
Piko 55040 SmartControl Digital Starter Set

Piko 55040 SmartControl Digital Starter Set£425.00   £385.00

DCC Train Automation   01823 429309
Search: