The turnout decoder can switch up to eight turnouts. If light signals are used, one needs one double-spool relay (Item no.: 10019) per signal. All outputs are short-circuit proof. Overall, the decoder can be loaded with up to 2A; this also applies to every single connection for the period of one second! The address range is between 1 and 256. The connection is made with two cables onto the two rail profiles. If a high output is required, of course it is possible to create one’s own supply network, which is supplied out of a booster of its own. There is a special solution for operating 10775 with the Lokmaus® 2/3. In this case the decoder can be programmed onto the locomotive address and four turnouts created by means of functions F1 to F4. Anyone using a multiMAUS or a RouteControl at a later date, can then use all eight turnout outputs again.
|Dimensions (LxWxH) || ||90 x 84 x 23 mm || || |