DCX51-P12 decoder with plug PluX

Top properties DCX51-P12

* 4 function outputs (Color front and rear, 2 reinforced additional outputs)
* 0.8 amp motor current
* PluX 12 direct connector for the new 12-pin interface PluX
* Control of Digital couplings manually or through automatic clutch
* Rangierfunktion (Cut in half speed and / or no delay in the acceleration and braking)
* Function outputs separated dimmable
* Direct connection of LEDs to function properly dimmed outputs possible

DCC data format

Technical data

All outputs of the receiver be powered by an internal bridge rectifier, which allows a maximum total current of 1A. Motor and function outputs and may not exceed the sum of the allowable power total rectifier current.

* Rail voltage: 8-22V
* Maximum current: 1.0 A
* Maximum motor current: 0.8 A
* Maximum total current of all outputs: 1.0 A
* 4 amplified outputs function to load: 250mA
* High-frequency motor control: 16kHz
* Continuously low-motor control: 30-150Hz
* Operating temperature: -10 to 90 ° C
* Dimensions (LxWxH): 18.6 x 9.5 x 3.6 mm (without pins, connector pins with height: 7mm)