Top properties DCX70-2

* 7 enhanced function outputs (front and rear lights and 5 additional outputs)
* 1.0 amp motor current
* Control of digital clutches manually or through automatic clutch
* Rangierfunktion (cut in half speed and / or no delay in the acceleration and braking)
* Function outputs separately dimmable
* Direct connection of LEDs to function properly dimmed outputs possible

Technical data

All outputs of the receiver be powered by an internal bridge rectifier, which allows a maximum total current of 1A. Motor and function outputs and may not exceed the sum of the allowable power total rectifier current.

* Rail voltage: 8-24V
* Maximum current: 1A
* Maximum motor current: 1A
* Maximum total current of all outputs: 600mA
* 7 function output increased load capacity up to: 250mA
* High-frequency motor control: 16kHz
* Continuously low-motor control: 30-150Hz
* Operating temperature: -10 to 90 ° C
* Dimensions (LxWxH): 17x11x2, 6mm

Top properties DCX70-2 decoder 8 pin NEM 652 with wires

* 7 enhanced function outputs (front and rear lights and 5 additional outputs)
* 1.0 amp motor current
* Control of digital clutches manually or through automatic clutch
* Rangierfunktion (cut in half speed and / or no delay in the acceleration and braking)
* Function outputs separately dimmable
* Direct connection of LEDs to function properly dimmed outputs possible

Technical data

All outputs of the receiver be powered by an internal bridge rectifier, which allows a maximum total current of 1A. Motor and function outputs and may not exceed the sum of the allowable power total rectifier current.

* Rail voltage: 8-24V
* Maximum current: 1A
* Maximum motor current: 1A
* Maximum total current of all outputs: 600mA
* 7 function output increased load capacity up to: 250mA
* High-frequency motor control: 16kHz
* Continuously low-motor control: 30-150Hz
* Operating temperature: -10 to 90 ° C
* Dimensions (LxWxH): 17x11x2, 6mm