Top properties DCX51-2D These come with wires only

* 8 function outputs (front and back light, 2 and 4 reinforced unreinforced additional outputs)
* 1.5A continuous motor current
* Control of digital clutches manually or through automatic clutch
* Rangierfunktion (cut in half speed and / or no delay in the acceleration and braking)
* Function outputs separately dimmable
* Direct connection of LEDs to function properly dimmed outputs possible

Technical data

All outputs of the receiver be powered by an internal bridge rectifier, which allows a maximum total current of 1.5A. Motor and function outputs and may not exceed the sum of the allowable power total rectifier current.

* Rail voltage: 8-24V
* Maximum current: 1.5 A
* Maximum motor current: 1.5 A
* Maximum total current of all outputs: 1.5 A
* 4 amplified outputs function to load: 0.5 A
* 4 function outputs unreinforced resilient to: 10mA
* High-frequency motor control: 16kHz
* Continuously low-motor control: 30-150Hz
* Operating temperature: -10 to 90 ° C
* Dimensions (LxWxH): 25x15x3, 7 mm

Top properties DCX51-2 (These come with wire only,8 pin with wires and also 6 pin with wires.)

* 8 function outputs (front and back light, 2 and 4 reinforced unreinforced additional outputs)
* 1.5A continuous motor current
* Control of digital clutches manually or through automatic clutch
* Rangierfunktion (cut in half speed and / or no delay in the acceleration and braking)
* Function outputs separately dimmable
* Direct connection of LEDs to function properly dimmed outputs possible

Technical data

All outputs of the receiver be powered by an internal bridge rectifier, which allows a maximum total current of 1.5A. Motor and function outputs and may not exceed the sum of the allowable power total rectifier current.

* Rail voltage: 8-24V
* Maximum current: 1.5 A
* Maximum motor current: 1.5 A
* Maximum total current of all outputs: 1.5 A
* 4 amplified outputs function to load: 0.5 A
* 4 function outputs unreinforced resilient to: 10mA
* High-frequency motor control: 16kHz
* Continuously low-motor control: 30-150Hz
* Operating temperature: -10 to 90 ° C
* Dimensions (LxWxH): 25x15x3, 7 mm