LDT DB-2 Digital booster

The DigitalBooster DB-2 is a short circuit protected Power-Amplifier (Booster) for digital model railway layouts.

It supplies a digital current of 2,5 Ampere.

The DigitalBooster DB-2 is suitable for the digital formats Märklin-Motorola and DCC.

The DB-2 can be connected to any command station which supports the 5-poles booster bus:
Control Unit (Märklin-Motorola-Format), Central Station 1 and 2, Intellibox, EasyControl, ECoS, DiCoStation, KeyCommander (Märklin-Motorola- and DCC-Format) and TWIN-CENTER (DCC-Format).

Each Power-Amplifier DB-2 will be supplied with a 5-poles boosterbus-cable (1m length).

For the supply of the DigitalBooster DB-2 are model railway transformers suitable with a capacity of min. 50VA and an alternating current of 16 to 18 Volt (e.g. from Conrad Electronic Part No. 21 27 28 with 52VA / 18V).

If you want to use the DigitalBooster DB-2 on a command station which does not supports the 5-poles booster bus but only the 3-poles DCC-Boosterbus (clamp marking DCE) you can use the Booster-Adapter Adap-CDE.

If you want to use our low cost DigitalBooster DB-2 as well on Roco- or Fleischmann command stations (Roco Part No. 10761 and 10764 / Fleischmann Part No. 680901) and multiZENTRALEpro you can use the Booster-Adapter Adap-Roco.

LDT-Components from the Digital-Professional-Series can operate on your digital layout without any problems. The finished module and the finished module in a case comes with 2 years limited warranty.

Each DigitalBooster DB-2 will be supplied with a detailed operation- respectively assembly-instruction.