LDT 4 way accessory decoder (SA-DEC-4-DC-F)

4-fold turnout decoder for DCC Digital (SA-DEC-4-DC-F)

*For the digital control of:

Illuminations and motors.
For consumers up to 4Ampere each output.
High-current turnout drives with end-switch: e.g. Märklin gauge 1 turnout and signal drives (without stressing the digital circuit).

* Simple and secure connection of the voltage supply and the consumers by screw clips.

* The switching-current for the 4 bistable relays will be supplied by the digital circuit or by a separate input from an alternating current output of a model railway transformer (14 to 18Volt ~) to the decoder. Valuable digital current can be saved!

*SA-DEC-4 is a 4-fold switch decoder (like the k84) but with a self learning decoder address:

The decoder address can be set by pushing the SA-DEC-4 programming key and the key of the turnout control board or by a switch command of your PC with connected INTERFACE.
The decoder address will be permanently stored but can always be changed by pressing the programming key again. It’s as simple as that !

* A ready to use finished module, 86 x 76 mm pc-board with four bores for mounting purposes are available (Suitable installation material can be ordered under accessories).

* The decoder from our Digital-Professional-Series can operate without any difficulty on your digitall model railroad. This decoder is 100% compatible with the Märklin-Motorola data format or the DCC standard.

*This finished module and the finished module in a case comes with a 24 month warranty.

* The SA-DEC-4 decoder will be supplied with a detailed operating- /assembly instruction.