Lenz 13100 LT100 Dividing module

Lenz LT100 Dividing module (Separation Module)

The separation module LT100 separates digital from analogue layout sections, while preventing short circuits. When driving over sectioning points, the power supply to the conventional layout section is temporarily interrupted. Each analogue circuit requires its own separation module.

General specifications:

Maximum voltage permitted: 18V effective

Maximum current permitted: 3.5 A

When using pulse width modulated power packs, the maximum frequency must not be higher than 150 Hz.

10321-01 "Silver 21 +" 1.0/1.8A with 21 pin plug

The DIGITAL plus SILVER 21 locomotive decoder has a built in NMRA 21 pin plug and is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less. That have a DCC Medium plug socket.

The characteristics of the decoder are:

* Super smooth and silent high frequency back-emf motor control.

* Asymmetrical DCC support including directional stopping.

* Adjustable precision stopping control.

* Low speed gear for switching operations.

* Selectable for operation with 14/27, or 28/128 speed steps.

* Operation on conventional DC layouts is possible or can be disabled.

* Motor output = 1A continuous, 1.8A max, > 5 A stall.

* Motor and function outputs protected.

* Four function outputs rated at 100mA each with advanced function mapping.

* Directional or independent lighting with dimming and special effects.

* Support for Advanced Consist Control and Extended Addressing.

* Support for programming on the mainline (operations mode programming).

* Support for all form of programming as described in NMRA RP-9.2.3

* Supports service mode decoder lock.

* RailCom

* Size: L 20.5 mm x W 15.5 mm x H 3.92 mm

"Gold mini +" 0.5/0.8A with NEM 651 plug 2 Function outputs

The DIGITAL plus GOLD Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of 0.5 Amp. or less.

The characteristics of the decoder are:



- Super smooth and silent high frequency back-emf motor control.

- Supports the industry proposed enhancements to the NMRA DCC Bidirectional

- data communication RPs

- USP with optional power module for operation on dirty track

- Asymmetrical DCC support including directional stopping

- Adjustable precision stopping control

- Low speed gear for switching operations

- Selectable for operation with 14/27, or 28/128 speed steps.

- Operation on conventional DC layouts is possible or can be disabled.

- Motor output = 0.5A continuous, 0.8A max, > 2 A stall.

- Motor and function outputs protected

- Two function outputs rated at 100mA each with advanced function mapping

- Directional or independent lighting with dimming and special effects.

- Support for Advanced Consist Control and Extended Addressing

- Support for programming on the mainline (operations mode programming)

- Support for all form of programming as described in NMRA RP-9.2.3

- Supports service mode decoder lock

- RailCom

- Size: L 0.43" x W 0.35"x H 0.13, L 11mm x W 9mm x H 3.3 mm (Mini-D)

"Gold +" 1.0/1.8A with cable and NEM 652 plug

The DIGITAL plus GOLD locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less.

The characteristics of the decoder are:

* Super smooth and silent high frequency back-emf motor control.

* Supports the industry proposed enhancements to the NMRA DCC Bidirectional data communication RPs

* USP with optional power module for operation on dirty track

* Asymmetrical DCC support including directional stopping

* Adjustable precision stopping control

* Low speed gear for switching operations

* Selectable for operation with 14/27, or 28/128 speed steps.

* Operation on conventional DC layouts is possible or can be disabled.

* Motor output = 1A continuous, 1.8A max, > 5 A stall.

* Motor and function outputs protected

* Four function outputs rated at 200mA each with advanced function mapping

* Directional or independent lighting with dimming and special effects.

* Support for Advanced Consist Control and Extended Addressing

* Support for programming on the mainline (operations mode programming)

* Support for all form of programming as described in NMRA RP-9.2.3

* Supports service mode decoder lock

* RailCom

* Size: L 0.91" x W 0.66"x H 0.2" L 23.0 mm x W 16.5 mm x H 6.5 mm

The DIGITAL plus GOLD MAXI locomotive decoder is suitable for all DC locomotives with continuous current draw of 3.0 Amp. or less.

The characteristics of the decoder are:

Super smooth and silent high frequency back-emf motor control.

Supports the industry proposed enhancements to the NMRA DCC Bidirectional data communication RPs

USP with optional power module for operation on dirty track

Asymmetrical DCC support including directional stopping

Adjustable precision stopping control

Low speed gear for switching operations

Selectable for operation with 14/27, or 28/128 speed steps.

Operation on conventional DC layouts is possible or can be disabled.

Motor output = 3A continuous, 5A max, > 10A stall.

Motor and function outputs protected

Eight function outputs rated at 1A each with advanced function mapping

Directional or independent lighting with dimming and special effects.

Support for Advanced Consist Control and Extended Addressing

Support for programming on the mainline (operations mode programming)

Support for all form of programming as described in NMRA RP-9.2.3

Supports service mode decoder lock

RailCom

Size: L 2.76" x W 1.14"x H 0.47" 70 mm x 29 mm x 12 mm