Uhlenbrock 67600 SD 2 Accessory Decoder.
Uhlenbrock magnetic article and switching decoders can be used in Mí_rklin, Motorola and DCC digital systems. In motor oil operation, addresses 1-320 can be addressed with the Intellibox, and addresses 1-256 can be addressed with other control units. In DCC mode, addresses 1-2048 are possible. The addresses are not specified. They can be chosen independently of each other. Each module has two outputs. Depending on the type, both outputs can be addressed together under one address or independently under two addresses.
The relay contacts of the switching decoder have potential-free outputs and can be connected as required. Each output can be loaded with 1 A The limitation to two connections per module keeps the cable paths short and the wiring of the system clear. Connection is easy via screw terminals. The address setting is very simple. First, the programming button of the decoder and then the corresponding switch button on the control panel is pressed. The decoder simply remembers the corresponding address.
The decoders are supplied with operating voltage and control information from the digital control unit.
Universal switching decoder with two potential-free changeover contacts, which can be addressed independently of each other under two addresses. The decoder independently switches two different consumers, such as lamps or motorised turnout drives.
Item No. 67600 SD2 switching decoder
