Shop by Brand
Shop by Price

VPEB product cases.

Housings/Cases

Meanwhile already for various modules matching enclosures available. Given the limited number of the enclosure in each case, for the time being manufactured by means of 3D-printing. As the media type has been selected for polylactide (PLA), a so-called "green" plastic which is biodegradable. With this we hope to contribute a little bit for the environment.

OC32 (-c)

OC32_Behuizing_mr.jpg

The OC32 housing is currently only available for the OC32 with connectors (as shown above). The version for the version with clip terminals is in preparation.
The housing fitting shims are needed to fill the gaps of the ETI and DCC connectors if they are not present.

DS32

DS32_behuizing.jpg

When DS32 sleds are provided where the OC32 retracted. If you're completely on a flat surface mount you have this really a "docking station". Click here for installation instructions.

TM44

TM44_behuizing_mr.jpg

UCCI / E

UCCI-E_Behuiziing.jpg

The above case is only suitable for the UCCI / E.
For the UCCI / It is a modified version:

UCCI / Es

UCCI-Es_Behuizing.jpg

For the UCCI and UCCI-s, so the "old" versions, no housing is available because the heat generation of the resistance that modules would distort the casing.

RM-U

RM-U_PP_behuizing.jpg

Above you can see the RM-U Plug and Play implementation in the housing. Below the standard RM-U. For the record: the case is different for Plug & Play and the "normal" version, so watch it on with your order!

RM-U_behuizing.jpg

DCC Train Automation   01823 429309
Search: