NEW
8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder
  Zoom
8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder
8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder

8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder

DR4018 16-channel switch decoder

PDF Instructions.

 

Our Price:  £139.95 (VAT incl.)
Product Code:  MP1-4018
Brand:  Digikeijs
Bar Code:  N/A

Availability:  

  

3 in stock

Digikeijs DR4102 point crossing interfaceDigikeijs DR4102 point crossing interface
Digikeijs DR4101 Switch motor interface (4 pcs)Digikeijs DR4101 Switch motor interface (4 pcs)
Digikeijs DR4103 Common Cathode - Common Anode adapters (4 pcs)Digikeijs DR4103 Common Cathode - Common Anode adapters (4 pcs)
+

8 Pack MP1 Point Motors With Digikeijs DR4018 Accessory Decoder 

MP1 Point Switch Model railway motor switch Model railway motor switch MP1

A motor switch with silent and slow motion.

  • Miniature scant-lings 28 x 40mm (w x l)
  • Inbuilt motor with planetary transmission
  • Direct replace of electromagnetic motor switch with a three-core connection
  • Easy set basic position of rod

The motor switch is used for electric operation of the two-position mechanisms in models such as turnout points of mechanical signals and barriers. The travel distance can be set in three steps, 3mm, 6mm and 9mm

This pack will come with the Digikeijs DR4018 accessory decoder programmed for the MTB MP1 point motors.

DC and AC power supplies are suitable, with a current consumption of approx 150 mA when moving. The mechanism has an end of travel detection switch, i.e. the control voltage can be applied permanently, to be disconnected automatically once a respective position is reached and the motion ceases. For accessory and frog control, there is a 1-amp switch SPDT contract with re-settable thermal protection fuse set to 0.5A short-circuit protection on the point frog.

DR4018 switch decoder

A switch decoder is used to switch the loads on and off. A decoder responds to commands from digital systems, just like a switch decoder. That is why this product is called a ‘decoder’. The DR4018 is always mounted under the track. The DR4018 switch decoder is programmed as standard to operate 8 turnouts and it is provided with various presets. This makes it possible, for example, to switch 16 permanent on/off switches, 8 two-light signals or 4 three-light signals. Naturally, a combination of presets is also possible. So, buy your DR4018 quickly to benefit from this! 

Benefits of the DR4018

Connecting a DR4018 offers multiple benefits. There are, for example, 8 turnouts for motor controls, 16 light outputs with or without TL effect, 8 Ahobs4 AKIs and 4 Dutch signal presets for Dutch, Belgian and German signals. In addition, the switch decoder has a multiprotocol DCC/Motorola, the switch decoder is programmable via POM, it has a maximum load of 2.5 Amp and all outputs are on one side of the module. Program your DR4018 and discover all the benefits!

Connecting DR4018 is easy

To connect the DR4018 you can use one of our manuals. These are available online and you can easily consult them. After looking at the manual, you will be able to program the DR4018. You can always contact us if you have any questions.

PDF Instructions.

Be the first to Write a Review for this item!

Related Products
Digikeijs DR5000-ADJ DCC Multi-bus central
£177.84 (VAT incl.)
  1 in stock
MTB MP1 Point Motor 6 Pack
£84.95 (VAT incl.)
  14 in stock
Digikeijs DR4102 point crossing interface
£24.71 (VAT incl.)
  4 in stock
Digikeijs DR4101 Switch motor interface (4 pcs)
£20.58 (VAT incl.)
  12 in stock
Digikeijs DR4103 Common Cathode - Common Anode adapters (4 pcs)
£20.58 (VAT incl.)
  Pre-order
MTB MP1 Point Motor
£15.50 (VAT incl.)
  26 in stock
follow us on
DCC Train Automation logo