Track Requirement: The base design has been made to use with Peco track.
Dimensions: L 575mm x W 278mm x H 131mm
Materials Used; MDF, Card, Acrylic
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes. Track not included.
Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.
PLEASE NOTE: ALL laser cut kits are made ‘to order’ and current turn around time is 10-14 days, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out.