Train Tech SS1R 2 Aspect Home Sensor Signal RH Feather (Red & Green LED's)

Train Tech SS1R 2 Aspect Home Sensor Signal RH Feather (Red & Green LED's)

Train Tech SS1R 2 Aspect Home Sensor Signal RH Feather (Red & Green LED's)

Our Price:  £45.00 (VAT incl.)
Product Code:  TTSS1R
Brand:  Train-Tech
Bar Code:  5.06E+12





Train Tech SS1L 2 Aspect Home Sensor SignalRight handed Feather (Red & Green LED's)

Sensor Signals - Fully Assembled Automatic Signalling - Now you can add automatic signalling to your layout in seconds with the new Sensor Signals.

Feathers can be controlled by a Mimic switch or by DCC

Left Hand Feather and Theatre Route indicatorsalso available.

Signals with built in sensors which operate automatically on their own. Can be linked to other Sensor Signals & Mimic Switches using a single wire. On DCC they slide into the track like a power clip or can be wired to work on analogue DC* or digital DCC.

Sensor signals work exactly like the real railway - signals automatically turn red when a train enters a block section to prevent other trains from entering the same block and preceding signals automatically change accordingly.

A sensor is built into every signal so there is no wiring or extra circuit boards etc. Just clip the signal into your track or wire for fully automatic 2, 3 or 4 aspect signalling which works just like the real railway!

Quick and easy installation - everything is built into the signal!

Signal senses train and changes signal until train safely past.

Realistic lights fade between changes.

Can link through socket to Mimic light using a single wire to show occupancy & position on a control panel (see Mimic switches)

Links to other Sensor Signals with a single wire for fully automatic block signalling!

Fully built ready to use signal with all electronics including sensor built into the signal & base- no other circuits or wires needed!

Automatic function can be overidden by a Mimic switch or a DCC command.

On Digital DCC - just slide in or wire straight into track for automatic or DCC control. On Analogue DC* - wire to a regular 12-16V DC supply

Assembled & tested and come complete with a Detailing kit including - ladder, handrail, phone etc

Fully assembled DCC LED Signals and Signal Kits are also available

* To use DC it is recommended the fingers are removed and the signal wired to a separate 12V supply. This will enable continuous operation. See user instructions supplied with the signal for full details.

Be the first to Write a Review for this item!

follow us on
DCC Train Automation logo