Track Requirement: The base design has been made to use Peco Code 75/100 track only
Dimensions: L 285mm x W 134mm x H 80mm
Materials Used; MDF, PETG, Card
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or gluing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes. Track not included.
Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.
PLEASE NOTE: ALL laser cut kits are made ‘to order’ and current turn around time is 10-14 days, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out.
****INSTRUCTIONS ARE CONSTANTLY BEING UPDATED AND THE LATEST VERSION WILL BE ON THIS PAGE BELOW****.
Current Instructions Update: Version II Kit – 6th September 2020
NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK – USE OUR CONTACT FORM TO GET A QUOTE OUTSIDE OF THE UK