Don’t want to spend £50+ on a laser cut baseboard just to have a small diorama? Then the RLL-DB-003 Diorama Baseboard cut kit is ideal.
This is our first ‘maxi’ diorama baseboard, giving a larger footprint than our standard 575mm x 375mm baseboards. We will be adding an end product over the coming days.
It measures 700mm in length, 400mm in width and has a front and side depth of 100mm, with the addition of a viewable 9 inch backscene to accommodate the smaller versions of the ID Backscenes that are available.
The kit simply glues together, using a stong adhesive/PVA and you can complete this in around 10 minutes, with a few additional minutes to hold it together whilst the glue starts to bond and dry.
It has a nice depth to allow the protection of any objects that you may place underneath, point motor, module etc. The under supports use the castellated style to give that additional strength and rigidity, whilst also having a number of small pre-cut holes under the board to allow the free-flowing of any cables that you use underneath.
NB: These maxi diorama baseboards are made from 3mm MDF and therfore should ONLY be used for ‘display’ purposes, i.e , a diorama or if joining multiple ones together, to be fully sat on a flush study base top. These baseboards will make an ideal starter into modelling for later progression up to a larger style baseboard.