Uhlenbrock 73415 Intelli Drive 2 6pin decoder
  Zoom

Uhlenbrock 73415 Intelli Drive 2 6pin decoder

Save 16%
£26.00
Our Price:  £21.95 (VAT incl.)
Product Code:  UH73415
Brand:  Uhlenbrock
Bar Code:  4033405734153

Availability:  

  

4 in stock

+

Uhlenbrock 73415 Loco Decoder 6 pin 

Suitable for:

  • Gauge: N-TT-H0e-H0m
  • Data format: DCC / Mot.
  • DC operation: yes

outputs:

  • Continuous load capacity: 0.5 A
  • Motor peak current: 1.0 A
  • Light and special functions: 0.25 A
  • Dimmable light outputs: yes
  • Additional special function outputs: no
  • Time-controlled special function outputs: no
  • Function mapping: no
  • SUSI sound interface: via solder pads 1 *)
  • LISSY output: via solder pads 1 *)

characteristics

  • Addresses DCC / Motorola: 9999/255 2 *)
  • Speed ​​steps DCC / Motorola: 128/14
  • Load control: yes
  • Programmable motor characteristic: no
  • Shunting: yes
  • Start braking delay: yes
  • Short circuit protected: yes
  • Over temperature protection: yes
  • Flash memory that can be updated: yes
  • micro susi
  • Error memory: yes
  • Connection: 6-pin. plug
  • Size in mm 12.5 x 7.5 x 2.8 3 *)

 

The digital decoder is the brain of your locomotive. It determines the driving characteristics and switching options. An unfavorably chosen decoder can quickly spoil your enjoyment of the vehicle. IntelliDrive decoders are state-of-the-art and guarantee you optimum driving characteristics.

You will find the right decoder for your locomotive in our extensive range.

In DCC mode, the decoders can be operated with 14, 27, 28 or 128 speed steps. They can be set to long addresses. This results in an address range of 1–9999.

In Motorola operation, the decoders have an address range from 1–255. However, only 80 addresses can be reached with the Märklin headquarters 6020 and 6021.

The decoders are programmable via Motorola and DCC centers and with all known programming types. In the case of decoders with load balancing, the locomotive motor is controlled via a motor voltage with a frequency of 18.75 KHz, which ensure extremely quiet motor operation. The minimum speed, maximum speed and acceleration / deceleration are adjustable.

The direction-dependent light outputs are dimmable, with some decoders also the special function outputs. An additional switchable shunting gear enables very fine speed control in the slow speed range. The maneuvering gear and deceleration braking can be switched on and off using function keys.

Item No. 73415 Mini decoder, microSUSI, Multi, DC, control, cable

Decoder type:  6 pin
Motor current, continuous:  0.5A
Function Outputs:  4

Be the first to Write a Review for this item!

follow us on
DCC Train Automation logo