A 21 Pin (21MTC) DCC Decoder suitable for models fitted with a 21 Pin DCC decoder socket (do not use with the Bachmann Branchline Class 90 – use 36-569 with these models).
Dual-mode DCC/DC decoder with Back EMF function
4 powered function outputs (+2 logic level outputs)
0.9A continuous load
RailComPlus for automatic registration on Dynamis Ultima
Suitable for models equipped with DC motors (including coreless motors)
NMRA/DCC with 14, 28 and 128 speed steps
Short and Long addresses
DCC and DC operation (DC operation is de-selectable)
Automatic recognition of operational mode and DCC speed step selection
Supports Lenz LG 100 braking sections
Motor Control Features
Suitable for models equipped with DC motors (including coreless motors)
0.9A continuous load
Silent & safe 20kHz pulse width frequency motor regulation
Motor output overload protection; Back EMF (de-selectable)
4 powered function outputs with overload protection
250mA load per output
500mA total load of all function outputs
2 additional logic outputs
Shunting speed and momentum key selectable
Dimensions
- 25.5mm x 15.5mm x 4.5mm
- Default Address
Address 3
DCC Service Mode & DCC PoM (Programming on Main)
Additional Features
RailCom Feedback system
RailComPlus automatic Registration