Featured Products
Train-O-Matic Lokommander 2 Micro (Smallest) 6pin Decoder
£23.21   £23.00 (VAT incl.)
  (1)
  41 in stock right now
DCC Specialties PSXX1 Circuit Breaker
£64.95   £54.00 (VAT incl.)
  Out of stock - preorder now
Uhlenbrock 63320 LocoNet feedback module 2-wire track
£79.90   £74.50 (VAT incl.)
  Out of stock - preorder now
ESU Decoder Tester 53900
£42.85 (VAT incl.)
  Incoming, expected soon
Uhlenbrock GBM 43400 Track occupancy detector with Relay
£27.99 (VAT incl.)
  1 in stock right now
Viessmann 5245 Locomotive Decoder with 8-Pole Interface Plug ''New Generation'' HO
£29.95   £25.95 (VAT incl.)
  Only 1 in stock - hurry!
Smail 800-6206TB Digital Point motors 6 pack
£215.95 (VAT incl.)
  1 in stock right now
Uhlenbrock 44 200 Signal Building Block
£29.95 (VAT incl.)
  Out of stock - preorder now

Welcome to DCC Train Automation the first stop on your journey to model railway digital control solutions.

Whether you are a new hobbyist or experienced we have the knowledge and expertise to help you find products to suit your needs.

While stocking products for all model railway requirements we specialise in computer control and sourcing products to provide solutions.

Our range of services includes layout design and building plus workshops in iTrain, Digikeijs products, ESU, Train-O-Matic, Uhlenbrock, Fleischmann/Roco, VPEB Dinamo and Zimo amongst many other leading brands. As well as working closely with our clients to provide solutions to their layouts we also work directly with the leading manufacturers providing our experience and insight during the development and testing of new products.

We hope you enjoy your visit to our site and find the right solution for you. If you require any help or advice please call or email us and we will be more than happy to help.

We often attend exhibitions, manufacturer at client sites and on these occasions our office and workshop, which is open Tuesday to Friday 10:00 - 17:00, may be closed so before visiting please check the website, or give us a call to ensure we will be on hand to help.

Shop Opening Hours are Tuesday to Friday 10:00 - 17:30 And on Saturdays By Appointment Only.  Please come and see what we have to offer.

1 Comment27 January 2024  |  Admin

How to wire up MTB MP4 point motors

The MTB point motors can be wired up in a few different ways. They can also be used with digital accessory decoders or by a normal switch. We will show you in the following article how we can use these motors.

8 January 2024  |  Admin

iTrain using Sprog for programing Loco CVs

How to create an extra interface and using Sprog DCC. Just follow our simple guide and you'll be ready for programming your loco CVs.

8 January 2024  |  Admin

Sprog programming in iTrain

Programming Loco decoders in iTrain using Sprog IIv4. If you're looking to use the Sprog to programme locos in iTrain, the following guide can help. To be able to have this function you need to have iTrain Plus or above.

21 August 2023  |  Admin

The LoDi-KSM

Why do you need a reversing loop module on a model railway system? In principle, reversing loop modules are only required for the 2-wire system. The reverse loop module switches a reverse loop automatically.

8 August 2023  |  Admin

The LoDi Rektor

The LoDi rector is an interface that is required to generate the necessary locomotive data formats. At the moment, the LoDi Rector supports DCC, M3, and Motorola in all variants. The only limit here is the model railway control software.

1 Comment4 August 2023  |  Admin

The LoDi-8-GBM v2

Our LoDi-8-GBM also gets a small update, the LoDi-8-GBM v2. It can now be fully updated and prepared for the DCC-A. The focus here is on the simplicity of setup and monitoring options.

24 July 2023  |  Admin

YaMoRC YD6016LN-CS and YD6016ES-CS

The YD6016LN-CS and the YD6016ES-CS are both current sensing units for block control. They work by having one rail isolated which is then the detection rail. It doesn't matter which rail you use, but it must always be the same side.

14 July 2023  |  Admin

DianSys TurnTable System

DinaSys makes turntable control electronics for a few different types of turntable. Once registered on their website, you're able to sign in and download the manuals and software.

22 March 2023  |  Admin

Setting up LoDi

The first thing you need to do is to download the LoDi software ProgrammerFX. The LoDi ProgrammerFX from version 2202 comes with its own Java for Windows and Linux, you don't have to install any additional Java.

31 January 2023  |  Admin

Veissmann CAR motion

As in reality, you're now able to control road vehicles electronically. After a development period of more than 4 years, it's now possible to bring the streets of the layout to life in a user-friendly way and with realistic driving behaviour.

Had a few problems regarding the use of the Digikeijs DR5000. James, during out of hours, was there to reply to messages and help out. Also after enquiring about different feedback modules, he made a Facebook live video. This spurred me on to make a purchase of which I have now fitted and works as I needed. Will absolutely use again, and highly recommend!!!

Andrew Campbell

follow us on
DCC Train Automation logo