ESU 53616 LokPilot Standard DCC, Plux12 interface, 4 amplified outputs + 2 logic outputs
Operational modes: NMRA/DCC with 14, 28 and 128 speed steps, DCC RailComŒ¬
- DCC 2-digit and 4-digit addresses (long and short addresses)
- Analog DC (de-selectable)
- Automatic recognition of operational mode and DCC speed selection
- Supports LenzŒ¬ LG100, RocoŒ¬ braking section
- Switching speed and acceleration & deceleration key selectable
- RailComPlusŒ¬ automatic detection by the command station
Throttle: 0.9 A continuous load
- Runs DC and coreless motors
- Silent, safe 20 kHz pulse width frequency motor regulation
- Motor output overload protection; Back EMF (de-selectable)
Function outputs: 4 outputs
- 21MTC connector version has two additional logic outputs
- 250mA load per output
- 500mA total load of all function outputs short-circuit-proof
- Free function allocation (function mapping)
Dimensions: ξPluX12: 14.5 x 8.3 x 2.4mm