ESU 54685 LokPilot micro V4.0, DCC, 6-pin NEM 651 direct connection Operation modes: NMRA/DCC with 14, 28 and 128 speed steps, prepared for DCC RailComPlusŒ¬ communication. DCC 2-digit and 4-digit addresses (long and short) Analog DC (de-selectable) Automatic recognition of operational mode and DCC speed step selection. Supports LenzŒ¬ LG100, LenzŒ¬ ABC brake mode and RocoŒ¬ braking sections Wrong-direction bit / stores operational status Switching speed and acceleration as well as deceleration key selectable Throttle: 0.75 A continuous load Runs DC and coreless motors Silent, safe 20 / 40 kHz pulse width frequency motor regulation Motor terminal overload protected. Fifth generation load back EMF (de-selectable). Function outputs: 2 outputs; 150mA load per output approx. 280mA total load of all function outputs. Outputs short circuit protected 2 logic outputs; Connection for ŒéPowerPackŒ‚ Free function allocation (function mapping) Dimensions: 10.5mm x 8.1mm x 2.8mm (Next18: 15.0mm x 9.5mm x 2.8mm)