OO Gauge – Fuelling Grids – FOR PECO’S CODE 75/100 STANDARD FLEXI TRACK
Why not add some more detail to your diesel depot layout and in the form of these fuelling grid packs.
Available From DCC Train Automation as a Pack including a single centre section and outer extension grids to make up approx 170mm worth of fuelling grid. You can add additional packs to make up the length that is required.
The centre section piece has 1600 grid holes in it, so these do take time to laser cut and therefore reflected in the cost of production.
Made from our ModelBord, these can be easily made up in a short period of time. The centre section piece has been designed so that it simply slots inbetween the sleepers on the Peco Code 75/100 flexible track and can be glued in place (recommended). The outer extension pieces simply butt up against the side of the rail just above the chair and gives as close as finish to the rail as possible but also being slightly under the rail height. Again, these can be glued in place once done.
If you have ballast the track already where these grids will go then you may find that you will need to remove the ballast to allow fitting of these.
Please note – track is NOT included in this kit!