Track Requirement: The base design has been made to use either Code 55 or 80 track
Dimensions: L300mm x W92mm x H 54 mm
Materials Used; MDF, ModelBord, Acetate
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife or similar will be required to remove pieces from part of the kits.
Other items required to assist: Deluxe Materials Glue, Super Glue (Optional) Sandpaper/Sanding Block, Small Flat File, Square, Masking Tape, Metal Ruler
Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are extremely fragile so handling with care is paramount.
PLEASE NOTE: ALL laser cut kits are made ‘to order’. PLEASE NOTE, AS FROM 1ST MAY – DELIVERY TIMES ARE NOW UP TO 28 DAYS, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out. We will do our best to delivery prior to the 28 days but cannot guarantee this so please do not order if you are unable to wait.