Train Tech SC2 3/4 Aspect or 2 Aspect/ Route DCC Signal Decoder

Multi Scale

This module allows you to convert signals to DCC operation. This unit is quick and easy to connect up to existing signals on your railway and with the use of screw terminals you do not need to do any soldering. Simply connect the Red, and Green LED wires to the relevant terminals and connect the board to the nearest piece of track or DCC Bus Wire.

This unit is easy to programme too, just press the "LEARN" button and enter an address on your DCC controller. Using this method you can easily synchronise points and signals together by giving them the same address.

Compatible with the SK Range of Train Tech signals and other LED signals.

Features:

• Control colour light LED signals by DCC
• One Touch DCC button - No Programming!
• Screw terminals for wires - no soldering required
• Connect directly to the signals LEDs - resistors are built in
• Simple 2 wire connection to track or controller output
• Can be synchronised to other signals and points by programming the same DCC accessory address