Resetting Digikeijs DR4018

19 July 2022

How to rest DR4018 to default settings

Connect to DR4018 to DR5000 as shown in diagram below:

Open DR5000 Configuration interface and select Prog Track on the DR5000

Select Service as the Mode

Set address to = 9999

Set CV number to = 8

Set Value to = 8

Select the program button on the DR4018....The Led will illuminate RED

Select the ORANGE Lightning button in the CV section to apply the reset

The RED LED will now go off

The DR4018 is now reset


follow us on
DCC Train Automation logo