Description

DAISY II-DCC-Digital-Set

The DAISY II digital set is a digital starter system for the ambitious model railroader. It consists of a DAISY II hand controller and a DCC center, which are connected to each other via a LocoNet cable. It masters all functions that are desirable for comfortable model railway operation.

The digital center is the heart of the DAISY II digital set. All commands are coordinated in the control center and further processed according to their importance. It generates the DCC track signal and provides the LocoNet connection to the hand controller.

Item No. 64300 DAISY II digital set: DAISY II control panel, DAISY II hand controller, power pack, 3 m coiled cable, operating instructions

Characteristics

20 locomotives can be controlled simultaneously
9999 locomotive addresses
DCC data format with 14, 28 and 128 speed steps
Can be selected individually for each locomotive address
Up to 24 special locomotive functions can be switched per locomotive
Up to 2000 solenoid items can be switched in DCC data format
Route memory for 16 routes.
These routes can be any with a maximum of 10 steps
Switch solenoid address between 1 and 2048
Max. Output Current: 2A
Programming track output for DCC decoder
LNCV programming for LocoNet components
Output for a reverse loop relay 61080 for automatic Control of a reversing loop
LocoNet-T connection for all common LocoNet devices
LocoNet B connection for external LN boosters such as Power 4 or Power 8
With RailCom® CutOut in the DCC signal, eg for the automation system MARCo
Dispatch mode for the FRED hand controller
Updateable via USB LocoNet interface 63120 expandability

You can connect up to 20 handheld controllers to the DAISY command station. You only need the 5-way LocoNet distributor 62250 for this. You can also connect all other LocoNet devices directly.

These include, among others: