Distribution strip with screw terminals
a maximum of 10 amps at a maximum of 60 volts
Display for alternating and direct voltage as well as position of the positive pole by LED.
We present:
The LoDi distributor series.
On the model railroad layout or in other extra-low voltage applications, you always need a simple and quick distribution of a ground line, for example, or the one + pole of a model railroad transformer, which in turn is supposed to illuminate houses and so on. . .
For this we have created the LoDi distributor series.
With these modules you can easily distribute the cables via screw terminals.
Please note: always work with wire end ferrules if possible.
You will soon find these and the matching model railway cables in our LoDi shop.
The characteristics of the LoDi distributor 2 * 3
- Simple distribution strip with screw terminals maximum 10 amps at maximum 60 volts.
1. The LoDi distributor and its connections
The LoDi distributor 2 * 3 has nine connection terminals with contact. It can only be used to distribute one wire per output. The respective output is marked with a 1 on the circuit board.
The LoDi distributor 2 * 3 has a total forward voltage of 10 amps.
0-60 volt AC or DC voltage input
Dimensions:
Length: 35mm
Width: 25mm
Height: 13 mm at the highest point
Weight: 10g
.jpg)
.jpg)
.jpg)
