Thanks to the MoBa distributor V2, it is possible to comfortably wire under the model railway layout.ξThe high-quality screw terminals can be used to quickly supply new loads or track gates with voltage.ξAll clamp points marked with "A" are connected with "B" just like all points.ξNext to each "A" terminal is a "B" terminal.ξSo you can connect your consumers clearly without cable chaos.ξ
Thanks to the status LEDs, you can see at any time under the system whether there is any voltage on the board or not, without measuring it.ξ
If both LEDs are illuminated, an AC voltage is applied to "A" and "B".ξ
If only the green LED is lit, there is a DC voltage with plus to "A" and minus to "B"
If only the yellow LED is lit, a DC voltage with plus is applied to "B" and minus to "A".ξ
Technical information:
- 12 clamping points - 6x "A" and 6x "B"
- Status LEDs
- Current carrying capacity per terminal - max.ξ8A
- Total current carrying capacity - max.ξ8A
- Cross section per terminal - max.Œæ1,5mmŒ_
- Maximum voltage - 30V AC / DC / digital voltage
- Cross section - max.Œæ1,5mmŒ_
- Dimensions approx. (L x W x H) - 75mm x 15mm x 13mm
- 2 holes for PCB mounting
.jpg)
