Looking for a small diorama display baseboard? Then the RLL-DB-004 Diorama Mini Baseboard cut kit is ideal.
It measures just 400mm in length, 375mm in width and has a front and side depth of 100mm, with the addition of a viewable 9 inch backscene to accommodate the smaller versions of the ID Backscenes that are available.
The kit simply glues together, using a stong adhesive/PVA and you can complete this in around 10 minutes, with a few additional minutes to hold it together whilst the glue starts to bond and dry.
It has a nice depth to allow the protection of any objects that you may place underneath, point motor, module etc. The under supports use the castellated style to give that additional strength and rigidity, whilst also having a number of small pre-cut holes under the board to allow the free-flowing of any cables that you use underneath.
NB: These mini diorama baseboards are made from 3mm MDF and therfore should ONLY be used for ‘display’ purposes, i.e , a diorama or if joining multiple ones together, to be fully sat on a flush study base top. These baseboards will make an ideal starter into modelling for later progression up to a larger style baseboard, or add the RLLDB001 and RLLDB002 boards to make a longer display.