Uhlenbrock Daisy II-WLAN

The new DAISY II-WLAN hand controller is intended for direct use on our central Intellibox 2neo, Daisy II-WLAN and the USB LocoNet and WLAN adapter. In addition to the LocoNet-over-TCP and WiThrottle mode, the handheld controller also supports the Z21 protocol, the ECoS ® client protocol and the Märklin network protocol and can therefore also be connected to various control centers from Märklin, Roco, ESU ® , Piko, etc be used.

The DAISY II WLAN hand controller is also suitable for operation on all control panels with a LocoNet connection. It can be plugged directly into the LocoNet, i.e. work wired or via WLAN at one of the control centers mentioned above.

The maximum number of WLAN hand controllers that can be used on a control panel depends on the control panel used.

The DAISY II WLAN handheld controller is conveniently charged via LocoNet. If there is no LocoNet, you will need the LocoNet charging adapter.

Characteristics

• Functional scope like the DAISY II Loco-Net hand controller
• Up to 16 WLAN hand controllers at the same time
• Battery charging via LocoNet
• In WLAN operation, the function of the stop button can be configured between global emergency stop (track voltage off) and locomotive-related emergency stop.

WiFi protocols

• LocoNet-over-TCP for Intellibox 2neo (65150),
• DAISY II WLAN central station (65260),
• LocoNet USB and WLAN adapter (63860)
• WiThrottle mode
• Z21 protocol for the Roco ® Z21
• ECoS ® client protocol for the ESU ® ECoS ® ,
• CabControl and Piko ® Smart-Box
• Märklin network protocol for the Märklin ®
• CS2 and CS3