Uhlenbrock 76320 Decoder, Multi, control, plug
  Zoom

Uhlenbrock 76320 Decoder, Multi, control, plug

Uhlenbrock 76320 Decoder

Our Price:  £21.95 (VAT incl.)
Product Code:  UH76320
Brand:  Uhlenbrock

Availability:  

  

Pre-order

+

Uhlenbrock 76320 Decoder, multi, AC, regulation, plug 8pin

Suitable for:

  • Gauge: H0e-H0m-H0
  • Data format: DCC / Mot.
  • Motor type: direct current / bell armature
  • Analog operation: = / ~
  • Connection: 8-pin. plug

Outputs:

  • Continuous load: 0.65 A
  • Peak motor current: 1.0 A.
  • Light and special functions: 0.65 A
  • Light outputs dimmable: yes
  • Additional special function outputs: no
  • Time-controlled special function outputs: no
  • Function mapping: no
  • SUSI sound interface: no
  • LISSY exit: no

properties

  • Addresses DCC / Motorola: 9999/255 2 *)
  • Speed ​​steps DCC / Motorola: 128/14
  • Load regulation: yes
  • Programmable motor characteristic: no
  • Shunting: yes
  • Start-up braking delay: yes
  • Lighting that can be switched off on the train side: no
  • RailCom: no
  • Motor frequency: high
  • Short-circuit protected: yes
  • Updatable flash memory: yes
  • Error memory: yes
  • Size in mm 19 x 15.4 x 5

annotation

Inexpensive. With load control.

1 *) SUSI and LISSY can only be used alternatively
2 *) Only 80 addresses can be reached with the Märklin 6020 and 6021 central units
3 *) Dimensions without connecting pins

The digital decoder is the brain of your locomotive. It determines the driving characteristics and switching options. An unfavorably chosen decoder can quickly spoil your enjoyment of the vehicle. IntelliDrive decoders are state of the art and guarantee you optimum driving characteristics.

You will find the right decoder for your locomotive in our extensive range.

In DCC mode, the decoders can be operated with 14, 27, 28 or 128 speed steps. They can be set to long addresses. This results in an address range of 1–9999.

In Motorola operation, the decoders have an address range from 1–255. However, only 80 addresses can be reached with the Märklin headquarters 6020 and 6021.

The decoders are programmable via Motorola and DCC centers and with all known programming types. In the case of decoders with load balancing, the locomotive motor is controlled via a motor voltage with a frequency of 18.75 KHz, which ensures extremely quiet motor operation. The minimum speed, maximum speed and acceleration / deceleration are adjustable.

The directional light outputs are dimmable, with some decoders also the special function outputs. An additional switchable shunting gear enables very fine speed control in the slow speed range. Maneuvering gear and deceleration braking can be switched on and off using function keys.

Item No. 76320 decoder, multi, AC, control, plug

Decoder type:  8pin on wires
Motor current, continuous:  0.65A
Function Outputs:  4

Be the first to Write a Review for this item!

follow us on
DCC Train Automation logo